{"title":"Termo Organika","description":"","products":[{"product_id":"termonium-plus-facade-graphite-eps-insulation-boards-pack","title":"TERMONIUM PLUS Façade - Graphite EPS Insulation Boards (Pack)","description":"\u003cp data-end=\"692\" data-start=\"209\"\u003eThese are silvery-grey boards, produced on the basis of an innovative raw material refined with graphite, which is added to the granules during polystyrene production to improve insulation performance so better thermal effects can be achieved or the same effect with lower board thicknesses. The boards are available with flat or milled edges that allow them to be arranged “on an overlap”. Standard dimensions: length 1000 mm, width 500 mm. Sold by the pack.\u003c\/p\u003e\n\u003cp data-end=\"902\" data-start=\"509\"\u003e\u003cstrong data-end=\"525\" data-start=\"509\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eExternal thermal insulation made using the ETICS method (BSO, light-wet)\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation on the surface of the frame wall\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eInsulation of wreaths and lintels\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation as a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and with the guidelines included in the construction project\u003c\/li\u003e\n\u003cli\u003eIf mechanical fasteners are used, they must be correctly selected for the substrate type and in line with the insulation design\u003c\/li\u003e\n\u003cli\u003eAfter attaching the boards in ETICS systems, the next stages of insulation work should follow with an appropriate technological break to ensure sufficient adhesive strength\u003c\/li\u003e\n\u003cli\u003eBeginning the reinforced layer too early may weaken the bond and reduce adhesion to the substrate or to the EPS\u003c\/li\u003e\n\u003cli\u003eContinuity of insulation and elimination of gaps at board joints must be ensured\u003cbr data-end=\"1948\" data-start=\"1945\"\u003eBoards must be protected from excessive heating during installation, as dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack covers the following approximate area:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mm boards cover approx. 6.0 m² per pack\u003c\/li\u003e\n\u003cli\u003e80 mm boards cover approx. 3.5 m² per pack\u003c\/li\u003e\n\u003cli\u003e100 mm boards cover approx. 3.0 m² per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMO_ORGANIKA_TERMONIUM_PLUS_FACADE_Declaration_of_Conformity.pdf?v=1762626142\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"50 mm","offer_id":52967828619528,"sku":null,"price":75.1,"currency_code":"GBP","in_stock":true},{"title":"80 mm","offer_id":52967828652296,"sku":null,"price":75.1,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":52967828685064,"sku":null,"price":75.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMONIUMPLUSFACADE.svg?v=1762896876"},{"product_id":"termonium-facade-graphite-eps-insulation-boards-pack","title":"TERMONIUM Façade - Graphite EPS Insulation Boards (Pack)","description":"\u003cp\u003eThese silvery-grey insulation boards are made with innovative raw material enhanced with graphite, which improves insulation performance and allows the same thermal effect with thinner boards. Available with flat or milled edges for overlapping installation. Standard dimensions: 1000 x 500 mm. Sold by the pack.\u003c\/p\u003e\n\u003cp data-end=\"136\" data-start=\"120\"\u003e\u003cstrong data-end=\"136\" data-start=\"120\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eExternal thermal insulation using the ETICS light-wet method\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eExternal thermal insulation using the light-dry method\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eThermal insulation on the surface of a frame wall\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eInsulation of wreaths and lintels\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eThermal insulation as a continuous outer layer on plinth walls\u003c\/li\u003e\n\u003cli data-end=\"674\" data-start=\"138\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"704\" data-start=\"676\"\u003e\u003cstrong data-end=\"704\" data-start=\"676\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse according to RTQ ITB 1260\/2020 and construction project guidelines\u003c\/li\u003e\n\u003cli\u003eSelect mechanical fasteners appropriate for the substrate and insulation design\u003c\/li\u003e\n\u003cli\u003eAllow a technological break before beginning the reinforced layer to ensure adhesive bonding strength\u003c\/li\u003e\n\u003cli\u003eProtect boards from overheating during installation as dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack covers the following approximate area:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mm boards cover approx. 6.0 m² per pack\u003c\/li\u003e\n\u003cli\u003e80 mm boards cover approx. 3.5 m² per pack\u003c\/li\u003e\n\u003cli\u003e100 mm boards cover approx. 3.0 m² per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMONIUM_facade_Declaration_of_Conformity.pdf?v=1762626889\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"50 mm","offer_id":52967829373192,"sku":null,"price":70.55,"currency_code":"GBP","in_stock":true},{"title":"80 mm","offer_id":52967829405960,"sku":null,"price":70.55,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":52967829438728,"sku":null,"price":70.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMONIUMfacade.svg?v=1762896781"},{"product_id":"galaxy-facade-graphite-eps-insulation-boards-pack","title":"GALAXY Façade - Graphite EPS Insulation Boards (Pack)","description":"\u003cp data-start=\"149\" data-end=\"410\"\u003eThese are silvery-grey graphite-enhanced EPS boards. The added graphite improves thermal performance, meaning better insulation can be achieved with thinner board thicknesses. They are available with flat or milled edges that allow installation “on an overlap”. Standard dimensions are 1000 mm in length, 500 mm in width. Sold by the pack.\u003c\/p\u003e\n\u003cp data-start=\"412\" data-end=\"911\"\u003e\u003cstrong data-start=\"412\" data-end=\"429\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eExternal thermal insulation made with the ETICS (light-wet) method\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eExternal thermal insulation made with the light-dry method\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eThermal insulation on the surface of a frame wall\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eInsulation of wreaths and lintels\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-start=\"412\" data-end=\"911\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"913\" data-end=\"1544\"\u003e\u003cstrong data-start=\"913\" data-end=\"942\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"913\" data-end=\"1544\"\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the construction design\u003c\/li\u003e\n\u003cli data-start=\"913\" data-end=\"1544\"\u003eIf mechanical fasteners are used, they must be appropriately selected for the substrate and follow the insulation design\u003c\/li\u003e\n\u003cli data-start=\"913\" data-end=\"1544\"\u003eIn ETICS systems, the next stages of work should follow only after the adhesive has achieved sufficient strength\u003c\/li\u003e\n\u003cli data-start=\"913\" data-end=\"1544\"\u003eMaintaining continuity of thermal insulation and eliminating gaps at board joints is essential\u003c\/li\u003e\n\u003cli data-start=\"913\" data-end=\"1544\"\u003eBoards must be protected from excessive heating during installation, especially due to the dark colour absorbing sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack covers the following approximate area:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mm boards cover approx. 6.0 m² per pack\u003c\/li\u003e\n\u003cli\u003e80 mm boards cover approx. 3.5 m² per pack\u003c\/li\u003e\n\u003cli\u003e100 mm boards cover approx. 3.0 m² per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Declaration of Conformity\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/GALAXY_facade_Declaration_of_Conformity.pdf?v=1762627665\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"50 mm","offer_id":52967829766408,"sku":null,"price":67.45,"currency_code":"GBP","in_stock":true},{"title":"80 mm","offer_id":52967829799176,"sku":null,"price":67.45,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":52967829831944,"sku":null,"price":67.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/GALAXYfacade.svg?v=1762896688"},{"product_id":"gold-facade-white-eps-insulation-boards-pack","title":"GOLD Façade - White EPS Insulation Boards (Pack)","description":"\u003cp data-start=\"250\" data-end=\"595\"\u003eThese are white or dotted polystyrene boards produced by the polystyrene foaming method and designed for thermal insulation of walls, especially façade insulation. They can be made with flat or milled edges that allow them to be arranged on an overlap. Standard dimensions: length 1000 mm, width 500 mm. Sold by the pack.\u003c\/p\u003e\n\u003cp data-start=\"597\" data-end=\"613\"\u003e\u003cstrong data-start=\"597\" data-end=\"613\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eExternal thermal insulation made using the ETICS method (BSO, light-wet)\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eThermal insulation on the surface of the frame wall\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eInsulation of wreaths and lintels\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-start=\"615\" data-end=\"1146\"\u003eThermal insulation as a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1148\" data-end=\"1176\"\u003e\u003cstrong data-start=\"1148\" data-end=\"1176\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1178\" data-end=\"1886\"\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the construction project guidelines\u003c\/li\u003e\n\u003cli data-start=\"1178\" data-end=\"1886\"\u003eIf mechanical fasteners are used they must be correctly selected for the substrate type and in line with the insulation design\u003c\/li\u003e\n\u003cli data-start=\"1178\" data-end=\"1886\"\u003eAfter fixing the boards in ETICS systems the next stages of work should follow with an appropriate technological break to ensure sufficient adhesive strength\u003c\/li\u003e\n\u003cli data-start=\"1178\" data-end=\"1886\"\u003eBeginning the reinforced layer too early may weaken the bond and reduce adhesion to the substrate or to the EPS\u003c\/li\u003e\n\u003cli data-start=\"1178\" data-end=\"1886\"\u003eContinuity of insulation and elimination of gaps at board joints must be ensured\u003cbr data-start=\"1811\" data-end=\"1814\"\u003eBoards should be protected against excessive heating during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack covers the following approximate area:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mm boards cover approx. 6.0 m² per pack\u003c\/li\u003e\n\u003cli\u003e80 mm boards cover approx. 3.5 m² per pack\u003c\/li\u003e\n\u003cli\u003e100 mm boards cover approx. 3.0 m² per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/GOLD_facade_Declaration_of_Conformity.pdf?v=1762628017\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"50 mm","offer_id":52967831798024,"sku":null,"price":61.15,"currency_code":"GBP","in_stock":true},{"title":"80 mm","offer_id":52967831830792,"sku":null,"price":61.7,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":52967831863560,"sku":null,"price":61.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/GOLDfacade.svg?v=1762896596"},{"product_id":"silver-facade-white-eps-insulation-boards-pack","title":"SILVER Façade - White EPS Insulation Boards (Pack)","description":"\u003cp data-end=\"498\" data-start=\"49\"\u003eThese are white or dotted expanded-polystyrene insulation boards manufactured using the polystyrene-foaming method and designed for thermal insulation of external walls, especially façade insulation. They are available with either flat edges or milled edges that allow the boards to be laid in an overlap configuration. Standard board dimensions are 1000 mm in length, 500 mm in width. Sold by the pack.\u003c\/p\u003e\n\u003cp data-end=\"516\" data-start=\"500\"\u003e\u003cstrong data-end=\"516\" data-start=\"500\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eExternal thermal insulation made using the ETICS method (BSO, light-wet)\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eThermal insulation on the surface of a frame wall\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eInsulation of cornices, lintels and other thermal bridges\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eThermal insulation in the form of a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003cli data-end=\"1110\" data-start=\"518\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1140\" data-start=\"1112\"\u003e\u003cstrong data-end=\"1140\" data-start=\"1112\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1928\" data-start=\"1142\"\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the guidelines in the construction project\u003c\/li\u003e\n\u003cli data-end=\"1928\" data-start=\"1142\"\u003eIf mechanical fasteners are used they must be correctly selected for the substrate type and in line with the technical design of the insulation\u003c\/li\u003e\n\u003cli data-end=\"1928\" data-start=\"1142\"\u003eIn ETICS systems the next stages of insulation work should begin only after an appropriate technological break to ensure sufficient adhesion and strength of the adhesive\u003c\/li\u003e\n\u003cli data-end=\"1928\" data-start=\"1142\"\u003eStarting the reinforced layer too early can weaken the bond to the substrate or the polystyrene\u003c\/li\u003e\n\u003cli data-end=\"1928\" data-start=\"1142\"\u003eContinuity of thermal insulation and elimination of gaps at board joints should be ensured\u003cbr data-end=\"1808\" data-start=\"1805\"\u003eSILVER Façade boards should be protected during installation from excessive heating because dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack covers the following approximate area:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mm boards cover approx. 6.0 m² per pack\u003c\/li\u003e\n\u003cli\u003e80 mm boards cover approx. 3.5 m² per pack\u003c\/li\u003e\n\u003cli\u003e100 mm boards cover approx. 3.0 m² per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/SILVER_facade_Declaration_of_Conformity.pdf?v=1762628481\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"50 mm","offer_id":52967832191240,"sku":null,"price":60.15,"currency_code":"GBP","in_stock":true},{"title":"80 mm","offer_id":52967832224008,"sku":null,"price":60.15,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":52967832256776,"sku":null,"price":60.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMOORGANIKASILVERfacade.svg?v=1762896503"},{"product_id":"dalmatian-plus-facade-white-eps-insulation-boards-pack","title":"DALMATIAN PLUS Façade - White EPS Insulation Boards (Pack)","description":"\u003cp data-end=\"501\" data-start=\"57\"\u003eThese are white or dotted expanded-polystyrene insulation boards manufactured using the polystyrene-foaming method and designed for thermal insulation of external walls, particularly façade insulation. They are available with either flat edges or milled edges that allow the boards to be installed “on an overlap”. Standard board dimensions are 1000 mm in length, 500 mm in width. Sold by the pack.\u003c\/p\u003e\n\u003cp data-end=\"519\" data-start=\"503\"\u003e\u003cstrong data-end=\"519\" data-start=\"503\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eExternal thermal insulation made using the ETICS method (light-wet, BSO)\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eThermal insulation on the surface of the frame wall\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eInsulation of cornices, lintels and other thermal bridges\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eThermal insulation forming a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003cli data-end=\"1108\" data-start=\"521\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1138\" data-start=\"1110\"\u003e\u003cstrong data-end=\"1138\" data-start=\"1110\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1925\" data-start=\"1140\"\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the guidelines in the construction project\u003c\/li\u003e\n\u003cli data-end=\"1925\" data-start=\"1140\"\u003eIf mechanical fasteners are used they must be correctly selected for the substrate type and in line with the technical insulation design\u003c\/li\u003e\n\u003cli data-end=\"1925\" data-start=\"1140\"\u003eIn ETICS systems the next stages of insulation work should begin only after an appropriate technological break to ensure sufficient adhesion and strength of the adhesive\u003c\/li\u003e\n\u003cli data-end=\"1925\" data-start=\"1140\"\u003eStarting the reinforced layer too early can weaken the bond to the substrate or the polystyrene\u003c\/li\u003e\n\u003cli data-end=\"1925\" data-start=\"1140\"\u003eContinuity of thermal insulation and elimination of gaps at board joints should be ensured\u003c\/li\u003e\n\u003cli data-end=\"1925\" data-start=\"1140\"\u003eDALMATIAN PLUS Façade boards must be protected during installation from excessive heating because dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack covers the following approximate area:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mm boards cover approx. 6.0 m² per pack\u003c\/li\u003e\n\u003cli\u003e80 mm boards cover approx. 3.5 m² per pack\u003c\/li\u003e\n\u003cli\u003e100 mm boards cover approx. 3.0 m² per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Declaration of Conformity\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/DALMATIAN_PLUS_facade_Declaration_of_Conformity.pdf?v=1762628690\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"50 mm","offer_id":52967832584456,"sku":null,"price":56.7,"currency_code":"GBP","in_stock":true},{"title":"80 mm","offer_id":52967832617224,"sku":null,"price":56.7,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":52967832649992,"sku":null,"price":56.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/DALMATIANPLUSfacade.svg?v=1762896243"},{"product_id":"dalmatian-facade-white-eps-insulation-boards-pack","title":"DALMATIAN Façade - White EPS Insulation Boards (Pack)","description":"\u003cdiv class=\"flex max-w-full flex-col grow\"\u003e\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"1964f5ef-715f-47a1-9226-68c07d8907ad\" dir=\"auto\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal [.text-message+\u0026amp;]:mt-1\" data-message-model-slug=\"gpt-5-1\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[1px]\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full break-words light markdown-new-styling\"\u003e\n\u003cp data-start=\"52\" data-end=\"456\"\u003eThese are white or dotted expanded-polystyrene insulation boards produced using the polystyrene-foaming method. They are designed for thermal insulation of walls, especially façade insulation. Boards are available with flat or milled edges to allow installation “on an overlap”. Standard dimensions are 1000 mm in length, 500 mm in width. Sold by the pack.\u003c\/p\u003e\n\u003cp data-start=\"458\" data-end=\"474\"\u003e\u003cstrong data-start=\"458\" data-end=\"474\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eExternal thermal insulation made using the ETICS method (light-wet, BSO)\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation on the surface of the frame wall\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eInsulation of cornices, lintels and other thermal bridges\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation forming a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1065\" data-end=\"1093\"\u003e\u003cstrong data-start=\"1065\" data-end=\"1093\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003ePolystyrene boards should be used in line with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the construction project\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eMechanical fasteners must be correctly selected for the substrate type and the technical insulation design\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eAfter fixing the boards in ETICS systems, subsequent stages must only begin after an appropriate technological break to ensure sufficient adhesive strength\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eStarting the reinforced layer too early can weaken adhesion to the substrate or the polystyrene\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eContinuity of thermal insulation and elimination of gaps between boards must be ensured\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eDALMATIAN Façade boards must be protected during installation from excessive heating because dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack covers the following approximate area:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mm boards cover approx. 6.0 m² per pack\u003c\/li\u003e\n\u003cli\u003e80 mm boards cover approx. 3.5 m² per pack\u003c\/li\u003e\n\u003cli\u003e100 mm boards cover approx. 3.0 m² per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/DALMATIAN_facade_Certificate_of_Conformity.pdf?v=1762629238\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"50 mm","offer_id":52967833665800,"sku":null,"price":53.75,"currency_code":"GBP","in_stock":true},{"title":"80 mm","offer_id":52967833698568,"sku":null,"price":53.75,"currency_code":"GBP","in_stock":true},{"title":"100 mm","offer_id":52967833731336,"sku":null,"price":53.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/DALMATIANfacade.svg?v=1762896123"},{"product_id":"gold-facade-white-eps-insulation-boards-per-m2","title":"GOLD Façade - White EPS Insulation Boards (Per m2)","description":"\u003cp data-end=\"595\" data-start=\"250\"\u003eThese are white or dotted polystyrene boards produced by the polystyrene foaming method and designed for thermal insulation of walls, especially façade insulation. They can be made with flat or milled edges that allow them to be arranged on an overlap. Standard dimensions: length 1000 mm, width 500 mm, thickness 20mm. Sold by the m².\u003c\/p\u003e\n\u003cp data-end=\"613\" data-start=\"597\"\u003e\u003cstrong data-end=\"613\" data-start=\"597\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eExternal thermal insulation made using the ETICS method (BSO, light-wet)\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eThermal insulation on the surface of the frame wall\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eInsulation of wreaths and lintels\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-end=\"1146\" data-start=\"615\"\u003eThermal insulation as a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1176\" data-start=\"1148\"\u003e\u003cstrong data-end=\"1176\" data-start=\"1148\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1886\" data-start=\"1178\"\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the construction project guidelines\u003c\/li\u003e\n\u003cli data-end=\"1886\" data-start=\"1178\"\u003eIf mechanical fasteners are used they must be correctly selected for the substrate type and in line with the insulation design\u003c\/li\u003e\n\u003cli data-end=\"1886\" data-start=\"1178\"\u003eAfter fixing the boards in ETICS systems the next stages of work should follow with an appropriate technological break to ensure sufficient adhesive strength\u003c\/li\u003e\n\u003cli data-end=\"1886\" data-start=\"1178\"\u003eBeginning the reinforced layer too early may weaken the bond and reduce adhesion to the substrate or to the EPS\u003c\/li\u003e\n\u003cli data-end=\"1886\" data-start=\"1178\"\u003eContinuity of insulation and elimination of gaps at board joints must be ensured\u003cbr data-end=\"1814\" data-start=\"1811\"\u003eBoards should be protected against excessive heating during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Declaration of Conformity\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/GOLD_facade_Declaration_of_Conformity.pdf?v=1762628017\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"Default Title","offer_id":53008934371592,"sku":null,"price":4.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/GOLDfacade.svg?v=1762896596"},{"product_id":"silver-facade-white-eps-insulation-boards-per-m2","title":"SILVER Façade - White EPS Insulation Boards (Per m2)","description":"\u003cp data-start=\"49\" data-end=\"498\"\u003eThese are white or dotted expanded-polystyrene insulation boards manufactured using the polystyrene-foaming method and designed for thermal insulation of external walls, especially façade insulation. They are available with either flat edges or milled edges that allow the boards to be laid in an overlap configuration. Standard board dimensions are 1000 mm in length, 500 mm in width, 20mm in thickness. Sold by the m².\u003c\/p\u003e\n\u003cp data-start=\"500\" data-end=\"516\"\u003e\u003cstrong data-start=\"500\" data-end=\"516\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eExternal thermal insulation made using the ETICS method (BSO, light-wet)\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eThermal insulation on the surface of a frame wall\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eInsulation of cornices, lintels and other thermal bridges\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eThermal insulation in the form of a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003cli data-start=\"518\" data-end=\"1110\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1112\" data-end=\"1140\"\u003e\u003cstrong data-start=\"1112\" data-end=\"1140\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1142\" data-end=\"1928\"\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the guidelines in the construction project\u003c\/li\u003e\n\u003cli data-start=\"1142\" data-end=\"1928\"\u003eIf mechanical fasteners are used they must be correctly selected for the substrate type and in line with the technical design of the insulation\u003c\/li\u003e\n\u003cli data-start=\"1142\" data-end=\"1928\"\u003eIn ETICS systems the next stages of insulation work should begin only after an appropriate technological break to ensure sufficient adhesion and strength of the adhesive\u003c\/li\u003e\n\u003cli data-start=\"1142\" data-end=\"1928\"\u003eStarting the reinforced layer too early can weaken the bond to the substrate or the polystyrene\u003c\/li\u003e\n\u003cli data-start=\"1142\" data-end=\"1928\"\u003eContinuity of thermal insulation and elimination of gaps at board joints should be ensured\u003cbr data-start=\"1805\" data-end=\"1808\"\u003eSILVER Façade boards should be protected during installation from excessive heating because dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Declaration of Conformity\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/SILVER_facade_Declaration_of_Conformity.pdf?v=1762628481\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"Default Title","offer_id":53008943743240,"sku":null,"price":4.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMOORGANIKASILVERfacade.svg?v=1762896503"},{"product_id":"dalmatian-plus-facade-white-eps-insulation-boards-per-m2","title":"DALMATIAN PLUS Façade - White EPS Insulation Boards (Per m2)","description":"\u003cp data-start=\"57\" data-end=\"501\"\u003eThese are white or dotted expanded-polystyrene insulation boards manufactured using the polystyrene-foaming method and designed for thermal insulation of external walls, particularly façade insulation. They are available with either flat edges or milled edges that allow the boards to be installed “on an overlap”. Standard board dimensions are 1000 mm in length, 500 mm in width, 20 mm in thickness. Sold per m².\u003c\/p\u003e\n\u003cp data-start=\"503\" data-end=\"519\"\u003e\u003cstrong data-start=\"503\" data-end=\"519\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eExternal thermal insulation made using the ETICS method (light-wet, BSO)\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eThermal insulation on the surface of the frame wall\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eInsulation of cornices, lintels and other thermal bridges\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eThermal insulation forming a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003cli data-start=\"521\" data-end=\"1108\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1110\" data-end=\"1138\"\u003e\u003cstrong data-start=\"1110\" data-end=\"1138\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1140\" data-end=\"1925\"\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the guidelines in the construction project\u003c\/li\u003e\n\u003cli data-start=\"1140\" data-end=\"1925\"\u003eIf mechanical fasteners are used they must be correctly selected for the substrate type and in line with the technical insulation design\u003c\/li\u003e\n\u003cli data-start=\"1140\" data-end=\"1925\"\u003eIn ETICS systems the next stages of insulation work should begin only after an appropriate technological break to ensure sufficient adhesion and strength of the adhesive\u003c\/li\u003e\n\u003cli data-start=\"1140\" data-end=\"1925\"\u003eStarting the reinforced layer too early can weaken the bond to the substrate or the polystyrene\u003c\/li\u003e\n\u003cli data-start=\"1140\" data-end=\"1925\"\u003eContinuity of thermal insulation and elimination of gaps at board joints should be ensured\u003c\/li\u003e\n\u003cli data-start=\"1140\" data-end=\"1925\"\u003eDALMATIAN PLUS Façade boards must be protected during installation from excessive heating because dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/DALMATIAN_PLUS_facade_Declaration_of_Conformity.pdf?v=1762628690\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"Default Title","offer_id":53008949805320,"sku":null,"price":3.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/DALMATIANPLUSfacade.svg?v=1762896243"},{"product_id":"dalmatian-facade-white-eps-insulation-boards-per-m2","title":"DALMATIAN Façade - White EPS Insulation Boards (Per m2)","description":"\u003cdiv class=\"flex max-w-full flex-col grow\"\u003e\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"1964f5ef-715f-47a1-9226-68c07d8907ad\" dir=\"auto\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal [.text-message+\u0026amp;]:mt-1\" data-message-model-slug=\"gpt-5-1\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[1px]\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full break-words light markdown-new-styling\"\u003e\n\u003cp data-start=\"52\" data-end=\"456\"\u003eThese are white or dotted expanded-polystyrene insulation boards produced using the polystyrene-foaming method. They are designed for thermal insulation of walls, especially façade insulation. Boards are available with flat or milled edges to allow installation “on an overlap”. Standard dimensions are 1000 mm in length, 500 mm in width, 20 m in thickness. Sold per m².\u003c\/p\u003e\n\u003cp data-start=\"458\" data-end=\"474\"\u003e\u003cstrong data-start=\"458\" data-end=\"474\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eExternal thermal insulation made using the ETICS method (light-wet, BSO)\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation on the surface of the frame wall\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eInsulation of cornices, lintels and other thermal bridges\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eThermal insulation forming a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003cli data-start=\"476\" data-end=\"1063\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1065\" data-end=\"1093\"\u003e\u003cstrong data-start=\"1065\" data-end=\"1093\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003ePolystyrene boards should be used in line with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the construction project\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eMechanical fasteners must be correctly selected for the substrate type and the technical insulation design\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eAfter fixing the boards in ETICS systems, subsequent stages must only begin after an appropriate technological break to ensure sufficient adhesive strength\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eStarting the reinforced layer too early can weaken adhesion to the substrate or the polystyrene\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eContinuity of thermal insulation and elimination of gaps between boards must be ensured\u003c\/li\u003e\n\u003cli data-start=\"1095\" data-end=\"1804\"\u003eDALMATIAN Façade boards must be protected during installation from excessive heating because dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/DALMATIAN_facade_Certificate_of_Conformity.pdf?v=1762629238\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"Default Title","offer_id":53008952754440,"sku":null,"price":3.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/DALMATIANfacade.svg?v=1762896123"},{"product_id":"galaxy-facade-graphite-eps-insulation-boards-per-m2","title":"GALAXY Façade - Graphite EPS Insulation Boards (Per m2)","description":"\u003cp data-end=\"410\" data-start=\"149\"\u003eThese are silvery-grey graphite-enhanced EPS boards. The added graphite improves thermal performance, meaning better insulation can be achieved with thinner board thicknesses. They are available with flat or milled edges that allow installation “on an overlap”. Standard dimensions are 1000 mm in length, 500 mm in width, 20mm in thickness. Sold per m².\u003c\/p\u003e\n\u003cp data-end=\"911\" data-start=\"412\"\u003e\u003cstrong data-end=\"429\" data-start=\"412\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eExternal thermal insulation made with the ETICS (light-wet) method\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eExternal thermal insulation made with the light-dry method\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eThermal insulation on the surface of a frame wall\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eInsulation of wreaths and lintels\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"412\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1544\" data-start=\"913\"\u003e\u003cstrong data-end=\"942\" data-start=\"913\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1544\" data-start=\"913\"\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and the construction design\u003c\/li\u003e\n\u003cli data-end=\"1544\" data-start=\"913\"\u003eIf mechanical fasteners are used, they must be appropriately selected for the substrate and follow the insulation design\u003c\/li\u003e\n\u003cli data-end=\"1544\" data-start=\"913\"\u003eIn ETICS systems, the next stages of work should follow only after the adhesive has achieved sufficient strength\u003c\/li\u003e\n\u003cli data-end=\"1544\" data-start=\"913\"\u003eMaintaining continuity of thermal insulation and eliminating gaps at board joints is essential\u003c\/li\u003e\n\u003cli data-end=\"1544\" data-start=\"913\"\u003eBoards must be protected from excessive heating during installation, especially due to the dark colour absorbing sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/GALAXY_facade_Declaration_of_Conformity.pdf?v=1762627665\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"Default Title","offer_id":53008959734024,"sku":null,"price":4.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/GALAXYfacade.svg?v=1762896688"},{"product_id":"termonium-facade-graphite-eps-insulation-boards-per-m2","title":"TERMONIUM Façade - Graphite EPS Insulation Boards (Per m2)","description":"\u003cp\u003eThese silvery-grey insulation boards are made with innovative raw material enhanced with graphite, which improves insulation performance and allows the same thermal effect with thinner boards. Available with flat or milled edges for overlapping installation. Standard dimensions: 1000 x 500 mm x 20 mm. Sold per m².\u003c\/p\u003e\n\u003cp data-start=\"120\" data-end=\"136\"\u003e\u003cstrong data-start=\"120\" data-end=\"136\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eExternal thermal insulation using the ETICS light-wet method\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eExternal thermal insulation using the light-dry method\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eThermal insulation on the surface of a frame wall\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eInsulation of wreaths and lintels\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eThermal insulation as a continuous outer layer on plinth walls\u003c\/li\u003e\n\u003cli data-start=\"138\" data-end=\"674\"\u003eFilling expansion joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"676\" data-end=\"704\"\u003e\u003cstrong data-start=\"676\" data-end=\"704\"\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse according to RTQ ITB 1260\/2020 and construction project guidelines\u003c\/li\u003e\n\u003cli\u003eSelect mechanical fasteners appropriate for the substrate and insulation design\u003c\/li\u003e\n\u003cli\u003eAllow a technological break before beginning the reinforced layer to ensure adhesive bonding strength\u003c\/li\u003e\n\u003cli\u003eProtect boards from overheating during installation as dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Declaration of Conformity\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMONIUM_facade_Declaration_of_Conformity.pdf?v=1762626889\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"Default Title","offer_id":53009072980232,"sku":null,"price":4.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMONIUMfacade.svg?v=1762896781"},{"product_id":"termonium-plus-facade-graphite-eps-insulation-boards-per-m2","title":"TERMONIUM PLUS Façade - Graphite EPS Insulation Boards (Per m2)","description":"\u003cp data-end=\"692\" data-start=\"209\"\u003eThese are silvery-grey boards, produced on the basis of an innovative raw material refined with graphite, which is added to the granules during polystyrene production to improve insulation performance so better thermal effects can be achieved or the same effect with lower board thicknesses. The boards are available with flat or milled edges that allow them to be arranged “on an overlap”. Standard dimensions: length 1000 mm, width 500 mm, thickness 20 mm. Sold per m².\u003c\/p\u003e\n\u003cp data-end=\"902\" data-start=\"509\"\u003e\u003cstrong data-end=\"525\" data-start=\"509\"\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eExternal thermal insulation made using the ETICS method (BSO, light-wet)\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eExternal thermal insulation made using the light-dry method\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation on the surface of the frame wall\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation in the gap of a closed three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation in the gap of a ventilated three-layer wall\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eInsulation of wreaths and lintels\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eInsulation of balcony loggias\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation of window jambs\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation of all layered walls\u003c\/li\u003e\n\u003cli data-end=\"902\" data-start=\"509\"\u003eThermal insulation as a continuous outer layer on the plinth wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Recommendations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolystyrene boards should be used in accordance with Technical and Quality Recommendation RTQ ITB 1260\/2020 and with the guidelines included in the construction project\u003c\/li\u003e\n\u003cli\u003eIf mechanical fasteners are used, they must be correctly selected for the substrate type and in line with the insulation design\u003c\/li\u003e\n\u003cli\u003eAfter attaching the boards in ETICS systems, the next stages of insulation work should follow with an appropriate technological break to ensure sufficient adhesive strength\u003c\/li\u003e\n\u003cli\u003eBeginning the reinforced layer too early may weaken the bond and reduce adhesion to the substrate or to the EPS\u003c\/li\u003e\n\u003cli\u003eContinuity of insulation and elimination of gaps at board joints must be ensured\u003cbr data-end=\"1948\" data-start=\"1945\"\u003eBoards must be protected from excessive heating during installation, as dark colours absorb sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetailed product related information can be found below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMO_ORGANIKA_TERMONIUM_PLUS_FACADE_Declaration_of_Conformity.pdf?v=1762626142\" title=\"Declaration of Conformity\" rel=\"noopener\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKS Buiders Yard Limited","offers":[{"title":"Default Title","offer_id":53009078944008,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/files\/TERMONIUMPLUSFACADE.svg?v=1762896876"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6007\/9112\/collections\/Termo_Organica_Logo_Tile.svg?v=1765988247","url":"https:\/\/gksbuildersyard.com\/collections\/termo-organika.oembed","provider":"GKS Builders Yard Limited","version":"1.0","type":"link"}